Filter
Top Products
5: Configuration Using Telnet or Serial Port
XPort AR User Guide 108
Accept any character
Enable accept mode upon the reception of a character.
Accept block network
Block the tunneling of network data.
Accept block serial
Block the tunneling of serial data.
Accept cp set group <group>
Enter the CP Group to set upon the creation or termination of a connection.
Accept cp set group connect <value>
Sets the CP Set Group to specified value upon connection.
Accept cp set group disconnect <value>
Sets the CP Set Group to specified value upon disconnection.
Accept flush serial data
Flush the serial data buffer upon a connection.
Accept keep alive <milliseconds>
Enable TCP keepalives and set the timer in milliseconds.
Accept port <number>
Set a specific port to use as the local port.
Accept protocol ssh
Use SSH for accept mode.
Accept protocol tcp
Use TCP for accept mode.
Accept protocol tcp aes
Use AES over TCP for accept mode.