Filter
Top Products
4: Configuration Using Web Manager
XPort AR User Guide 27
Figure 4-11. Line 1 Configuration
2. Enter or modify the following fields:
Status
Displays the whether the current line is enabled. To change
the status, select Enabled or Disabled from the pull-down
menu.
Baud Rate
Select the XPort AR’s baud rate from the pull-down menu.
The default is 9600.
Parity
Select the XPort AR’s parity from the pull-down menu. The
default is None.
Data Bits
Select the number of data bits from the pull-down menu. The
default is 8.
Stop Bits
Select the number of stop bits from the pull-down menu. The
default is 1.
Flow Control
Select the XPort AR’s flow control from the pull-down menu.
The default is None.
3. Click Submit. Changes are applied immediately to the XPort AR.
Line 1 Command Mode
Setting Command Mode enables the CLI on the serial line.
To configure Line 1’s command mode:
1. Click Line 1 Æ Command Mode from the navigation menu. The Line 1
Command Mode window displays.