Filter
Top Products
4: Configuration Using Web Manager
XPort AR User Guide 28
Figure 4-12. Line 1 Command Mode
2. Enter or modify the following fields:
Always Select Yes to enable the XPort AR’s command mode.
Use Serial String Select Yes to start command mode based on a serial string.
Use CP Group Select Yes to start command mode based on the value of a
CP group.
Echo Serial String Select Yes to enable echoing of the serial string at boot-up.
Wait Time
Enter the wait time for the serial string during boot-up.
Serial String In the Char field, enter the serial string characters. Select the
string type from the pull down menu as Character, Binary, or
Decimal notation.
CP Group
Enter the CP group name and its value.
Signon Message In the Char field, enter the boot-up signon message. Select
the string type from the pull down menu as Character,
Binary, or Decimal notation.
3. In the Current Configuration table, clear currently stored fields as necessary.
4. Click Submit. Changes are applied immediately to the XPort AR.
Tunnel 1 and Tunnel 2 Settings
Select the Tunnel 1 or Tunnel 2 link on the left menu bar to display the Tunnel
menu. The sub-menus allow for the configuration of serial settings, connect mode,