Filter
Top Products
5: Configuration Using Telnet or Serial Port
XPort AR User Guide 70
Enable Menu
The following sections describe the configurable parameters within the Enable
configuration menu.
Auto show interfaces
Displays interface statistics.
Auto show processes
Continuously displays thread runtime information.
Chem
Change from the Enable menu to the Configure Email 1 (Chem) sub-menu. For the
list of Chem prompts, see Chem Menu on page 74.
Chem 1
Change from the Enable menu to the Configure Email 1 (Chem) sub-menu. For the
list of Chem prompts, see Chem Menu on page 74.
Chem 2
Change from the Enable menu to the Configure Email 2 (Chem) sub-menu. For the
list of Chem prompts, see Chem Menu on page 74.
Chem 3
Change from the Enable menu to the Configure Email 3 (Chem) sub-menu. For the
list of Chem prompts, see Chem Menu on page 74.
Chem 4
Change from the Enable menu to the Configure Email 4 (Chem) sub-menu. For the
list of Chem prompts, see Chem Menu on page 74.
Clear interface counters
Sets to zero the interface session counters.
Clear line <number>
Use the show sessions command to view the active command mode sessions on
the XPort AR. Each session is assigned a number. Use the clear line command
to end a specific command mode session.