Lantronix XPort AR Network Card User Manual


 
4: Configuration Using Web Manager
XPort AR User Guide 65
Figure 4-51. System
To configure the XPort AR’s system settings:
1. Click System from the navigation menu. The System window opens.
2. Configure the XPort AR’s system using the following fields:
Reboot Device Click Reboot to reboot the XPort AR. The system refreshes
and redirects the browser to the XPort AR’s home page.
Restore Factory Defaults Click Factory Defaults to restore the XPort AR to the original
factory settings. All configurations will be lost. The XPort AR
automatically reboots upon setting back to the defaults.
Upload New Firmware Click Browse to locate the firmware file location. Click
Upload to install the firmware on the XPort AR. The device
automatically reboots upon the installation of new firmware.
Name Enter a new Short Name and a Long Name (if necessary).
The Short Name is a maximum of 8 characters. Changes
take place upon the next reboot.