Filter
Top Products
5: Configuration Using Telnet or Serial Port
XPort AR User Guide 99
Tftp put binary <source file> <destination file>
<host>
Send a binary file using TFTP.
Tftp put binary <source file> <destination file>
<host> <port>
Send a binary file using TFTP.
Touch <string>
Create a file on the filesystem. Enter the filename to be created.
Line Menu
The following sections describe the configurable parameters within the Line 1, Line 2,
and Line 3 configuration menus. These configure serial ports 1, 2, and 3.
Auto show statistics
Continuously display line statistics.
Clear line counters
Set to zero the serial counters.
Clrscrn
Clears the screen.
Command mode always
Set command mode to always enabled.
Command mode cp
Set Command Mode to use CP settings.
Command mode cp <cp group> <value>
Specify a CP group and trigger value.
Command mode echo serial string
Enable echoing of serial data at boot-up.