Lantronix XPort AR Network Card User Manual


 
4: Configuration Using Web Manager
XPort AR User Guide 39
Current Configuration
CP
Indicates the Configurable Pin number.
Pin #
Indicates the hardware pin number associated with the CP.
Configured As Displays the CPs configuration. A CP configured as Input is
set to read input. A CP configured as Output drives data out
of the XPort AR. Peripheral is a setting assigned by the
XPort AR.
State A value of 1 means asserted. 0 means de-asserted. I
indicates the CP is inverted.
Groups
Indicates the number of groups in which the CP is a member.
Active In Group
A CP can be a member of several groups. However, it may
only be active in one group. This field displays the group in
which the CP is active.
3. To display the CP status of a specific pin, click the CP number under the Current
Configuration table. The CP Status table displays detailed information about the
CP.
CP Status
Name
Displays the CP number.
State
Current enable state of the CP.
Note: Peripheral pins are locked.
Value
Displays the last bit in the CP’s current value.
Bit
Visual display of the 32 bit placeholders for a CP.
I/O
A “+” symbol indicates the CP is asserted (the voltage is high).
A “-“ indicates the CP voltage is low.
Logic
An “I” indicates the CP is inverted.
State
Displays the assertion value of the corresponding bit.
CP#
Displays the CP number.
Groups
Lists the groups in which the CP is a member.
4. To change a CP’s value:
a) Select the CP from the drop-down list.
b) Enter the CP’s value.
c) Click Submit. Changes are applied immediately to the XPort AR.
5. To change a CP’s configuration:
a) Select the CP from the drop-down list.
b) Select the CP’s configuration from the drop-down list.
c) (If necessary) Select the Assert Low checkbox.
d) Click Submit. Changes are applied immediately to the XPort AR.
Note: To modify a CP, all groups in which it is a member must be disabled.