Updating the server conguration
When you start the server for the rst time after you add or remove an internal option or external device,
you might receive a message that the conguration has changed. The UEFI Setup Utility program starts
automatically so that you can save the new conguration settings.
Some options have device drivers that you must install. For information about installing device drivers, see
the documentation that comes with each option.
If the server has an optional RAID and you have installed or removed a hard disk drive, see the documentation
that comes with the RAID for information about reconguring the disk arrays.
For information about conguring the integrated Gigabit Ethernet controller, see “Conguring the Gigabit
Ethernet controllers” on page 218.
174 Hardware Maintenance Manual