Filter
Top Products
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 7 “Parts listing, RS210 Types 6531, 6532, 6533, and 6534” on page 175 to determine which
components are customer replaceable units (CRU) and which components are eld replaceable units (FRU).
• If an action step is preceded by “(Trained service technician only),” that step must be performed only by
a trained service technician.
Ethernet Duplex setting modied
from %1 to %2 by user %3.(%1 =
CIM_EthernetPort.FullDuplex; %2 =
CIM_EthernetPort.FullDuplex; %3 =
user ID)
Info A user has modied the
Ethernet port duplex setting.
No action; information only.
Ethernet MTU setting modied from
%1 to %2 by user %3.(%1 =
CIM_EthernetPort.ActiveMaximumTransmissionUnit;
%2 =
CIM_EthernetPort.ActiveMaximumTransmissionUnit;
%3 = user ID)
Info A user has modied the
Ethernet port MTU setting.
No action; information only.
Ethernet Duplex setting modied
from %1 to %2 by user %3.(%1 =
CIM_EthernetPort.NetworkAddresses;
%2 =
CIM_EthernetPort.NetworkAddresses;
%3 = user ID)
Info A user has modied the
Ethernet port MAC address
setting.
No action; information only.
Ethernet interface %1
by user %2.(%1 =
CIM_EthernetPort.EnabledState;
%2 = user ID)
Info
A user has enabled or
disabled the Ethernet
interface.
No action; information only.
Hostname set to %1
by user %2.(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 = user ID)
Info A user has modied the host
name of the IMM.
No action; information only.
IP address of network
interface modied from %1
to %2 by user %3.(%1 =
CIM_IPProtocolEndpoint.IPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.IPAddress;
%3 = user ID)
Info A user has modied the IP
address of the IMM.
No action; information only.
IP subnet mask of network
interface modied from %1
to %2 by user %3s.(%1 =
CIM_IPProtocolEndpoint.SubnetMask;
%2 =
CIM_StaticIPAssignmentSettingData.SubnetMask;
%3 = user ID)
Info A user has modied the IP
subnet mask of the IMM.
No action; information only.
IP address of default
gateway modied from %1
to %2 by user %3s.(%1 =
CIM_IPProtocolEndpoint.GatewayIPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.DefaultGatewayAddress;
%3 = user ID)
Info A user has modied the
default gateway IP address
of the IMM.
No action; information only.
OS Watchdog response %1 by
%2.(%1 = Enabled or Disabled; %2
= user ID)
Info
A user has enabled or
disabled an OS Watchdog.
No action; information only.
Chapter 4. Diagnostics 41