Filter
Top Products
ISDN BRI Unnumbered IP Configuration Example
12-18 PortMaster Configuration Guide
Configuring a Dial-In User
A user account must be set up on the PortMaster router in San Francisco so that
PortMaster in Denver can dial in when traffic is queued. The new user denver should
be configured with the values shown in Table 12-11.
After you configure the user table as shown in Table 12-11, enter the following
command to save the configuration:
Command> save all
For more information about configuring user table parameters, refer to Chapter 7,
“Configuring Dial-In Users.”
Table 12-11
User Table Values
Setting Command
Username add netuser
denver
Password set user
denver
password
anypasswd
Protocol set user
denver
protocol
ppp
User IP address set user
denver
address
192.168.200.1
Netmask set user
denver
netmask
255.255.255.0
IPX network set user
denver
ipxnet
F3
RIP routing set user
denver
rip on
MTU set user
denver
mtu
1500
Compression set user
denver
compression on