Filter
Top Products
Using Office-to-Office Connections 15-11
Configuration Steps for an Office-to-Office Connection
Configuring Dial-Out Location Settings
You must create a location entry on the PortMaster in Paris for the London office. This
entry allows the PortMaster in Paris to call the PortMaster in the London office when
network traffic is queued. Configure a new location
london
with the values shown in
Table 15-9.
Table 15-9
Location Table Values
Setting Command
Location name add location
london
Protocol set location
london
protocol ppp
IP destination set location
london
destination
192.168.200.1
Netmask set location
london
netmask
255.255.255.0
IPX network set location
london
ipxnet
F2
(When configuring the IPX network number for the location,
you must set a number that is different from the one on the
Ethernet at either end.)
RIP routing set location
london
rip on
MTU set location
london
mtu
1500
Compression set location
london
compression on
Idle timer set location
london
idle
5
High-water mark set location
london
high_water
0
Dial group set location
london
group
0
Telephone number set location
london
telephone
5551212
Username set location
london
username
paris
Password set location
london
password
anything
Maximum ports set location
london
maxports
1