Filter
Top Products
Configuration Steps for a Synchronous V.25bis Connection
14-10 PortMaster Configuration Guide
Configuring a Dial-In User
A user account must be set up on the PortMaster router in Miami so the PortMaster in
Boston can dial in when traffic is queued. The new user
boston
should be configured on
the PortMaster in Miami with the values shown in Table 14-9.
No compression is used on synchronous lines.
After you configure user table settings as shown in Table 14-9, enter the following
command to save the configuration:
Command> save all
For more information about configuring user table parameters, refer to Chapter 7,
“Configuring Dial-In Users.”
Table 14-9
User Table Values for
Miami
Setting Command
Username add netuser
boston
Password set user
boston
password
anypasswd
Protocol set user
boston
protocol ppp
User IP address set user
boston
address
192.168.200.1
Netmask set user
boston
netmask
255.255.255.0
IPX network set user
boston
ipxnet
F3
RIP routing set user
boston
rip on
MTU set user
boston
mtu
1500