Lucent Technologies PortMaster Network Router User Manual


 
Using ISDN BRI 12-19
ISDN BRI Unnumbered IP Configuration Example
Configuring a Dial-Out Location
A location entry on the PortMaster in San Francisco must be created for the location
identified as denver. This allows the PortMaster router in San Francisco to call the
PortMaster in Denver when network traffic is queued. The new location denver should
be configured with the values shown in Table 12-12.
Table 12-12
Location Table Values
Setting Command
Location name add location
denver
Type set location
denver manual
(Set the location for manual dialing until after the
configuration has been tested. Once the configuration is
verified, change the connection type to on-demand.)
Protocol set location
denver ppp
IP destination set location
denver
destination
192.168.200.1
Netmask set location
denver
netmask
255.255.255.0
IPX network set location
denver
ipxnet
F3
RIP routing set location
denver
rip on
MTU set location
denver
mtu
1500
Idle timer set location
denver
idle
2
Dial group set location
denver
group
2
Username set location
denver
username
sf
Telephone number set location
denver
telephone
5551212
Password set location
denver
password
anypasswd
High-water mark set location
denver
high_water
0
Maximum ports set location
denver
maxports
1