Filter
Top Products
9
Installation
When using special sized paper:
(1) Press [Other].
(2) Select “Custom” using the cursor key.
Note: You can register three types of special
size as you want.
(3) Press [Enter].
(4) Enter the horizontal and vertical size of the paper using the numeric keypad.
Note: You can also enter the paper size using and of the cursor key.
Note: To change Horizontal / Vertical, use and of the cursor key.
(5) Press [Enter].
4
Press [Ppr.Type] after confirming the 1st cassette is selected.
5
Select the type of paper using the cursor key.
Then press [Enter].
Note: After you set the paper size for all cas-
settes, press
RESET
so the machine
returns to standby mode.
Paper size input for the 2nd paper cassette
1
Use the cursor key to select the 2nd paper
cassette. Then press [Enter].
2
Select the paper size to be set.
When using the standard paper size:
(1) Select the paper size using the cursor key or pressing [Paper].
(2) Press [Enter].
(North American Version) (European version)
When using the non standard paper size:
(1) Press [Other].
(2) Select the paper size using the cursor key or pressing [Paper].
Note: If you want to go back to the standard paper select display, press
[Standard].
(3) Press [Enter].
(North American Version) (European version)
3
After you set all paper sizes, press
RESET
to
return to standby mode.
Note: If you have not set all paper sizes, the
machine will not return to standby
mode even if you press
RESET
.