Filter
Top Products
Advanced Copy
Erase border
Your machine can make copies with erasing the shadow at all four sides of the
recording paper.
Note: Your machine has three types of erasing shadow function, Erase Center,
Erase Border and TopUp Copy. You can use these functions at one time.
Note: The default setting of the erased margin is 0.2 inches. You can change the
default setting. (See page 2.25.)
Note: You cannot use this function with the Positive/Negative function.
1
Press
MENU
.
2
Select “Erase Border” using the cursor key,
and then press [Enter].
3
Enter the upper/lower and left/right erased
margin using the numeric keypad or pressing
the and of the cursor key.
Note: You can specify the margin width as follows:
0.2″ to 2.0″ in 0.1″ steps.
Note: To change between upper/lower and left/right, press or of the
cursor key.
4
Press [Enter] to save the setting.
5
The Erase border icon will be displayed on the
LCD
.
6
Set your documents, then press
START
.
TopUp Copy
Your machine can make copies with erasing the shadow of the outside of the docu-
ment. This feature is convenient when you make a copy keeping the top cover
opened and the document is smaller than the paper you want to copy, for example,
when you want to make a copy of half-letter sized document on letter-sized paper.
Note: Your machine has three types of erasing shadow function, Erase Center,
Erase Border and TopUp Copy. You can use these functions at a time.
Note: This feature is available only with the
FBS
.
1
Press
MENU
.
2
Select “TopUp Copy” using the cursor key,
and then press [Enter].
3
Select the document size you want.
4
Press [Enter] to save the setting.
5
The icon will be displayed on the
LCD
.
6
Set your document on the
FBS
, then press
START
.
2.14