Filter
Top Products
Just in case
5.15
Just in Case Getting Started
The machine is not functioning as designed
Symptom Check for/What to do
The
LCD
shows nothing. Is only the
ENERGY SAVING
key lit up green?
The machine is in the Energy Saver mode. Press any key
on the control panel to cancel.
...or ...
The power switch is turned OFF.
Turn the power switch ON.
...or ...
The
LCD
contrast volume is turned to the excessively light
or dark position.
Viewing the
LCD
, adjust the
LCD
contrast volume as neces-
sary.
Control panel keys Is only the
ENERGY SAVING
key lit up
LED
?
do not respond. The machine is in the auto power off mode.
Press
ENERGY SAVING
key on the control panel to cancel.
...or ...
The power switch is turned OFF.
Turn the power switch ON.
The machine is not The power cord is left unplugged from the power outlet.
activated when the Plug the power cord into the power outlet.
power switch is turned
ON.
Misfeeds occur Paper size setting is incorrect.
frequently. Set the correct paper size.
Some of the selected Selected functions cannot be combined.
functions are Check the combination of functions. (See “Combination
unavailable. chart,” pages
AI
.4–
AI
.5.)
In EraseBorder or Margin is too wide. Or, margin of your document is too
EraseCenter mode, narrow.
parts of the original Set the narrower margin.
image are not copied.
Symptom Check for/What to do
In Combine mode, Your set originals are not identical in size and direction.
parts of the image are It is impossible to combine originals as they are not
not copied or parts identical in size and direction. Copy these originals with
of the copy paper are the same size paper, set copies which are identical in size
blank. and direction, and then select Combine.
In Combine mode, Your originals are set in incorrect order.
order of copies is not When you set a stack of originals in the
ADF
, the first page
correct. must be on top.
When you set an original on the
FBS
glass, start with the
first page to be copied.
In Duplex copy mode, Your originals are set in incorrect order.
order of copies is not When you set a stack of originals in the
ADF
, the first page
correct. must be on top.
When you set an original on the
FBS
glass, start with the
first page to be copied.