Filter
Top Products
Fax settings
Adjust the monitor speaker’s volume
Default setting: Medium.
You can set the volume of the monitor speaker, assuring that on-hook dialing will be
as loud (or as soft) as you require.
1
Press
MONITOR
/
CALL
on the control panel. You now should hear a dial tone.
Important: If you don’t hear a dial tone, make sure your fax machine is
plugged into a working phone line.
2
If the volume you hear is satisfactory, skip to step 4.
Otherwise, proceed to step 3.
3
Adjust the volume as you wish:
To turn the volume up, press .
To turns the volume down, press .
The LCD indicates the volume.
4
Press
MONITOR
/
CALL
again to hang up.
Panel auto reset time
Note: Default: After three minutes
The machine returns to its initial condition automatically after a certain period of
time. You can change this time from 1 to 10 minutes.
Note: The machine first resets the
LCD
display, and after certain period of time it
resets the key settings to the initial condition.
1
Press
MENU
,
J
, 1, 7, [Enter].
2
Enter the time to auto resetting, and then
press [Enter] to save the setting.
3
Press
RESET
to return to standby.
Printing your fax settings
After you’ve programmed settings into your machine, print a fax settings list.
We recommend this, particularly if you’re sharing the machine with other users,
who might change the settings.
With this list, you can quickly confirm that all of your settings are correct, without
having to go back and check them on the machine. Or, if you do need to undo
someone else’s changes, this list guides you in returning the machine to your
preferred settings.
Note: Please refer to the index at the end of these instructions to locate any
settings you don’t recognize or understand.
To print the settings list:
1
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
FAX
to change to Fax mode.
2
Press
MENU
,
J
, [List].
Printing a program list
Your machine can also print a program list. This lists the functions available on your
fax machine and the keystrokes needed to complete them.
Note: Please refer to the index at the end of these instructions to locate any
settings you don’t recognize or understand.
To print a program list, press
MENU
,*,8.
3.76
Settings for operation