Filter
Top Products
Copy Features
2.1
Basic copy
Some guidelines
Select document type
You can select the two document types by pressing
DOCUMENT
.
PHOTO
– Select this mode when copying documents contain-
ing photographs or drawings with letters.
PHOTO
/
TEXT
– Select this mode when copying photographs or
drawings.
AUTO
– This mode automatically selects the suitable setting
according to the document type.
Note: If you want to make only the light areas, such as the text written with pen-
cil, darken selectively, assign DocEnhance to a Soft Key and turn it on.
(See page 4.1.)
Note: You can change the document type priority. (See page 2.27.)
Adjust image contrast
You can adjust the copy image contrast to match your document by pressing
CONTRAST
.
DARK
– Darkens weak, “washed-out” images.
= – Provides some darkening of documents.
NORMAL
– Suited to most documents.
= – Provides some lightening of documents.
LIGHT
– Lightens up overly dark documents.
AUTO
– This mode automatically sets the suitable setting
according to the document density.
Note: You can change the image contrast priority. (See page 2.27.)
Automatic document size detection
Your machine can automatically detect the following size of your document and
select a suitable sized paper to copy your document.
• Letter (8.5″ × 11″)
• Legal (8.5″ × 14″)
• Ledger (11″ × 17″)
• Half-letter (5.5″ × 8.5″)
Note: Half-letter is available only with the
FBS
.
If the suitable sized paper is not set in the paper cassette, the
LCD
shows:
If you want to copy with the paper the machine auto-
matically selected, press
START
.
If you want to copy with other size paper, press
STOP
to cancel this operation, then set the suitable paper in
the cassette and adjust the Reduce/Enlarge ratio.
If you set the non-standard sized document or the machine could not detect the doc-
ument size, the
LCD
shows:
If you want to copy with the paper that the machine
automatically selected, press
START
.
If you want to copy with other sized paper, press
STOP
to cancel this operation, then set the suitable paper in
the cassette and adjust the Reduce/Enlarge ratio.
Manual paper select
You can select the paper manually by pressing [Paper] or using the cursor key.
Note: If the optional multi-paper tray is attached, you can select the multi paper
tray, see “Using the bypass tray” on page 2.7.