Filter
Top Products
Copy Features
Accessing the default copy setting mode
You can change or set the machine’s default copy settings.
Note: Regarding the changing of the fax settings, see pages 3.69–3.76.
Note: Regarding the changing of the machine settings, see pages 4.6–4.16.
To access the copy settings:
1
Press
MENU
.
2
Press [Copy Set].
3
Select the desired settings using the cursor key, and then press [Enter].
4
Change the settings to your preference.
5
Then, press [Exit] to save the setting.
A. Erase border setting
Default setting: OFF, Erased margin: Left and Right 0.2
″
, Top and Bottom 0.2
″
The default setting of the erased margins in the erase border function can be
changed within 0.2 – 2.0 inches in 0.1 inch steps.
1
Press
MENU
, [Copy Set].
2
Select “A.Erase Border Setting” and then
press [Enter].
3
To change the default setting of Erase Border,
select “Erase Border” then press [Enter].
4
Select “ON” or “OFF” then press [Enter] to
save the setting.
5
If you want to change the default value of
erased margin, select “Default” then press
[Enter].
6
Enter desired value, then press [Enter].
7
Press [Exit] or
RESET
to save the default set-
ting.
Note: Press
RESET
to return to standby.
Note: If you set the default setting to ON, the Erase Border icon will be appeared
on the
LCD
.
Copy settings
2.25