Filter
Top Products
Advanced Copy
Directional size (inch) magnification
The suitable magnification ratios will be automatically selected according to the
horizontal and vertical length of your document and copy image you entered.
Note: The range of size you can enter is 0.1 – 50.0 inches in 0.1 inch steps.
Note: If the calculated ratio is over than 400% or under than 25%, the ratio is set
with 100% automatically.
1
Press
MENU
.
2
Select “D.Mag.” using the cursor key and then press [Enter].
3
Press [Mag.inch].
4
Enter the horizontal size of your document
using the or of the cursor key or numeric
keypad. Then press of the cursor key.
5
Enter the vertical size of your document using
the or of the cursor key or numeric key-
pad. Then press of the cursor key.
6
Enter the horizontal size of the copy using the
or of the cursor key or numeric keypad. Then press of the cursor key.
7
Enter the vertical size of the copy using the or of the cursor key or
numeric keypad.
Note: To change number you entered, press or of the cursor key, then
enter new number.
8
Press [Enter] to save the setting. The D.Mag. icon will be displayed on the
LCD
.
9
Set your documents, then press
START
.
Positive / Negative
When this feature is turned on, black and white areas of your document will be
reversed.
Note: You cannot use this function with the Erase border function.
1
Press
MENU
.
2
Select “Nega/Posi” using the cursor key and then press [Enter].
3
Press [Enter] to turn this feature On.
Note: If you want to turn this feature Off,
press [Cancel].
4
The Reverse icon will be displayed on the
LCD
.
5
Set your documents, then press
START
.
Vertical
copy size
Vertical
original size
Horizontal copy size
Horizontal original size
2.16