Filter
Top Products
Chapter 3: 7401-2xxx and 3xxx Hardware Installation 3-7
Cable Routing
The cables can be routed either out the bottom or rear of the Fixed-
Angle Mount. The Power Cord is shipped from the factory routed
through the bottom exit hole in the Fixed-Angle Mount. To route the
cables out the rear exit, you must move the grommet from the bottom
exit to the rear exit hole.
Since these openings have different shapes, you must trim the
grommet to length.
1. Remove the grommet from the bottom exit hole.
16481
Rear Exit
Bottom Exit
Grommet