NCR 7401 Computer Hardware User Manual


 
6-20 Chapter 6: Operating System Recovery
NCR 7401-/22xx/25xx/26xx/32xx/35xx NT Operating System
Recovery Software
(Version 02.05.00.02)
(LPIN: D370-0483-0100)
Note: This product should only be used on 7401 terminals with a
Microsoft Windows NT Workstation 4.0 license.
7401-22xx/25xx/26xx/32xx/35xx NT Operating System Recovery
Software provides the means of restoring the operating system to the
hard disk of a 7401 terminal that has either a Summa or Summa II
processor board. The bootstrap program (di_intel.bsd) and disk
recovery boot image (di_intel.bid) are downloaded to the target
terminal over the network and restore the hard disk to the preinstalled
state as shipped from the factory. The following software is installed:
Microsoft Windows NT Workstation 4.0 with Service Pack 6a
Microsoft Internet Explorer 6.0 SP1 (6.0.2800.1106 SP1)
MicroTouch drivers (5.63 SR3)
SMI Lynx 3DM Video driver (4.00.1381.0178)
SoundFusion Audio driver (4.01.2086)
ESS Allegro Audio (4.03.00.3077)
Intel 82559 Ethernet LAN drivers (5.00.66.0000)
NCRSYSM driver (3.0.4.12)
Windows Installer (2.0)
The following drivers are not installed automatically, but can be
installed from their respective locations:
Backpack CD-ROM (2.04) C:\Install\Drivers\CDRom
Edgeport USB (2.15) C:\Install\Drivers\USB
USB Camera (2.15) C:\Install\Drivers\Camera
Configures the following settings/revisions:
Preinstalls NT to include the Product ID Number (PID)