Filter
Top Products
Chapter 4: 7401-4xxx Hardware Installation
Introduction
The 7401-4xxx terminal is fully assembled at the factory. This chapter
explains the mounting options and how to connect optional hardware
components to the terminal.
Installation Summary
The terminal should be removed from the shipping packaging and
visual checks made to verify the correct hardware configuration. The
system is then configured and any communication cables are
connected.
Only after inspection should the power cord be attached to the system
and then connected to the AC power source. Power-up self-tests will
run to verify basic functionality.
ROM-based setup should be used to configure network options. Full
configuration depends upon the system server and the management
web site.
U.K. Keyboard Configuration
Regional Options in the Control Panel must be configured for 7401-
4xxx terminals equipped with a U.K. keyboard (F130, F131, or F132).
Windows 2000
1. From the Windows Start button, select Settings > Control Panel >
Regional Settings.
2. On the General tab, select the Down arrow in the Your locale
(location) box and select English (United Kingdom from the list.