6-30 Chapter 6: Operating System Recovery
10. The directory that Ghost is now looking in should be Z: (if not,
switch to Z). Select the File name to load image from file
(nnnnnnn.gho) and press Enter.
11. Select the Local destination drive and press Enter.
12. Set the sizes of the primary and secondary partitions as follows.
O/S Primary Partition/ Format Secondary Partition Size
DOS 2 GB/FAT16 2 GB/FAT16
Win95 2 GB/FAT16 Fill remainder as FAT 32
WinNT 2 GB/FAT16 Fill remainder as NTFS
Win98 Single FAT 32 partition N/A
Win2000 Single FAT 32 partition N/A
WinXPe Single NTFS partition N/A
Note: In order to do this you may need to clear the amount from
the second partition.
13. Press Enter.
14. If you are recovering from Win9x, it is likely that the second
partition will be too small for FAT32. If so, a dialog is displayed
Converting partition from FAT32 to FAT, proceed?
Choose Yes.
15. At the next dialog box,
Proceed with disk load? Destination drive will be
permanently overwritten,
Choose Yes to start the recovery process.