NCR 7401 Computer Hardware User Manual


 
Chapter 6: Operating System Recovery 6-9
Operating System Restrictions
The following section describes restrictions for operating systems used
with the 7401 terminal.
Standby and Hibernate Mode Restriction
When using a 7401 terminal without a keyboard or mouse, the
Windows 2000, Windows XP PRO, and Windows XP Embedded OS
Standby Mode and Hibernate Mode should be avoided. These two modes
place the hardware in a low power state that requires an interrupt to
restart the processor.
The Windows 2000 and Windows XP Embedded Gold Disk Images
disable Hibernate Mode and Standby Mode on the 7454 terminal. These
two modes should not be used without a keyboard or mouse.
NCR 7401-22xx/25xx/32xx/35xx Win2000 Operating System Recovery
Software
(Version 02.03.00.01)
(LPIN: D370-0504-0100)
Note: This product should only be used on 7401 terminals with a
Microsoft Windows 2000 license.
7401-22xx/25xx/32xx/35xx Windows 2000 Operating System Recovery
Software provides the means of restoring the operating system to the
hard disk of a 7401 terminal. The bootstrap program (di_intel.bsd) and
disk recovery boot image (di_intel.bid) are downloaded to the target
terminal over the network and restore the hard disk to the preinstalled
state as shipped from the factory. The following software is installed:
Microsoft Windows 2000 Professional with Service Pack 2
Microsoft Internet Explorer 5.5 (version 5.50.4134.0600)
SMI Lynx EM/EM+ Video driver (version 5.0.2195.178)
SoundFusion Audio driver (version 5.12.01.3041)
Intel 82559 Ethernet LAN drivers (version 5.0.67.0)