Filter
Top Products
3-40 Chapter 3: 7401-2xxx and 3xxx Hardware Installation
Mounting Specification Illustrations
The following illustration shows the minimum allowable dimensions
for the display opening when the optional cosmetic bezel is used.
19100
348.7 mm
3.730 in.
4.2 mm
.165 in.
9.4 mm
.372 in.
270 mm
10.630 in.
345.4 mm
13.600 in.
156.2 mm
6.150 in.
141.6 mm
5.575 in.
292.4 mm
11.510 in.
17.2 mm
.678 in.
200.7 mm
7.900 in.
175 mm
6.888 in.
22.9 mm
.900 in.
FRONT SURFACE OF DISPLAY BEZEL (IF USED)
MUST PROTRUDE THROUGH ENCLOSURE. GASKET
MUST MEET INSIDE SURFACE OF CUSTOM
APPLICATION'S DISPLAY OPENING. THIS IS
TO PROVIDE A SECURE AND WATERTIGHT FIT.
OPTIONAL COSMETIC BEZEL
GASKET MUST MEET INSIDE SURFACE
OF CUSTOM DISPLAY OPENING.
(OPTIONAL COSMETIC GASKET NOT USED
IF OPTIONAL BEZEL IS NOT USED).
USE 4 #8-32 MACHINE SCREWS IN
CORNERS OF UNIT TO MOUNT DISPLAY
INTO ENCLOSURE. 8 TOTAL SCREWS
MAY BE USED FOR MULTIPLE MOUNTING
CONFIGURATIONS.