Filter
Top Products
Chapter 8: NCR 7401/7890 or 7892 Scanner Differences 8-5
7401 Scanner Default Settings
The 7401 Scanner is set up in manufacturing using an additional string
of commands to change some of the default settings that are provided
with the 7890 and 7892 scanners. Refer to the 7890 and 7892 documents
for the complete list of defaults.
The defaults specifically programmed for the 7401 Scanner are listed
below. These defaults are different from the 7890 and 7892 defaults.
Hex Command
ASCII
Command
Command Description Comments
31h, 30h, 35h, 1, 0, 5 Select RS-232
protocol
The 7401 Scanner can
only be used on an
RS-232 connection.
31h, 34h, 30h, 1, 4, 0 Disable Code 39 Enable with 1, 4, 1
31h, 35h, 30h, 1, 5, 0 Disable Interleaved
2 of 5
Enable with 1, 5, 1
31h, 37h, 30h, 1, 7, 0 Disable Code 128 Enable with 1, 7, 1
31h, 31h, 30h, 1, 1, 0 Disable Good Read
Tone
Enable with 1, 1, 1
31h, 32h, 43h,
35h
1, 2, C, 5 30 Second Active
Time
Other times can be
programmed; see the
7890 programming
books.