NCR 7401 Computer Hardware User Manual


 
2-26 Chapter 2: 7401-4xxx Product Overview
Printer sensors provide alerts for paper out, paper low, paper in
presenter, Printhead temperature, Printhead level position, and
paper jam.
The Printer uses a vendor-provided Windows Driver. OPOS
support is not available with the full page printer.
This device is powered by a 24 VDC power supply.
Other Integrated Devices and Indicators
Hard Disk Drive
A 2.5-inch IDE hard disk is available to support Windows NT. The
drive is the standard type that is used by notebook PCs.
Integrated CD-ROM
An integrated CD-ROM is mounted to the back of the core module
behind the LCD Touch Screen inside the cabinet. The CD-ROM is used
to install terminal software and can be used for other functions
requiring a CD-ROM.
Reset Switch
As a last resort, the Reset Switch can be used to reboot the system if the
software reset port mechanisms fail. The switch is on the connector
row at the bottom of the enclosure. Intentionally, it is not easily
accessible, but can be operated without removing covers or using
special tools.
19901a
Reset Switch
Caution: Except when testing software in a lab environment, always
disconnect the AC power cord.