Filter
Top Products
2-24 Chapter 2: 7401-4xxx Product Overview
open to permit easier access to the inside of the terminal for service
personnel.
Note: For 7401-4xxx terminals with a U.K. keyboard (F130, F131, or
F132), changes are required to the Regional Settings in the Control
Panel. Refer to Chapter 4 for details.
Pin Pad
A secure anti-vandal pin pad, constructed of non-destructive metal is
available as a feature. The Pin Pad with 10 numeric and 6 function keys
is integrated into the keyboard tray next to the keyboard and trackball.
The Pin Pad has a 64 KB memory for application use and 64 KB for
data storage. It has programmable protocols and speeds (1200-19200
bps). When the personal identification number (PIN) is entered, the Pin
Pad combines the PIN with the card data, encrypts this information,
and sends it to the host for verification. This device has a serial
interface and is powered by a COM Port C. The Port C Powered Port
option must be set in the BIOS. The Pin Pad is pre-configured for
encryption by an authorized encryption facility before it is integrated
into the keyboard. OPOS support is not available with the Pin Pad
Motorized Card Reader
An optional Motorized Card Reader is available to provide MSR card-
reading functionality similar to an ATM. When inserted, the card is fed
into the reader and is retained there until the transaction is complete.
The Motorized Card Reader has on-board intelligence to process
Magstripe Cards, Smart Cards, and Memory Cards:
• Supports bi-directional read of magnetic stripe data (3-track)
• Reads and writes all ISO 7816 T=0, T=1 micro-processor Smart
Cards
• Accepts cards with CP8 and ISO positions
• The card reader uses a vendor-provided Windows Driver. OPOS
support is not available with the motorized card reader.
• This device is powered by a 12 VDC power supply.