Filter
Top Products
Chapter 3: 7401-2xxx and 3xxx Hardware Installation 3-33
7401-K533 Wall Mount
To install the Tilt Mount on a flat vertical surface, use the K533 Wall
Mount Bracket Kit.
1. Secure the Wall Plate to the wall with lag screws (4) into the studs
or with hardware of similar strength. The recommended viewing
height for the terminal is 1.2 m (48 in.) from the floor.
16400a
Wall Plate
K533 Wall Mount
Adapter Plate
Release Lever
F501/K501
2. Install the Wall Mount Adapter Plate to the bottom of the terminal
with screws (4).
3. Install the terminal to the Wall Plate. The bottom of the Wall Mount
Adapter Plate has slots that mate to locking tabs on the Wall Plate.
4. Latch the Release Lever.