Filter
Top Products
Chapter 3: 7401-2xxx and 3xxx Hardware Installation 3-13
Installing Peripherals
This section describes how to install transaction printers and other
peripherals on the 7401-2xxx and 3xxx terminals.
Installing a Transaction Printer
The following printers can connect through a non-powered RS-232 or
USB connector. They all require an external power supply. The
illustrations show how to connect to the 7194 printer. Connecting to the
other three printers is done in the same manner. Refer to the
corresponding printer owner’s guide for illustrations of the connector
locations.
• 7158
• 7167
• 7194
• 7197
RS-232 Installation
1. Connect the Printer Interface Cable to the RS-232 Connector on the
back or on the bottom of the printer.
16632a
RS-232 Connector
Power Connector
Cash Drawer Connector