Filter
Top Products
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Configuring WLANS 5-5
v1.0, June 2007
• You can assign only one VLAN to the SSID. If you need to have multiple VLANs configured
for a WLAN, you must configure the SSID using the WLAN Advanced Configuration pages.
• The authentication server must be a RADIUS server or the WFS709TP’s internal database.
If you specify a RADIUS server, you can configure the server’s IP address, authentication and
accounting ports, and shared key.
If you specify the WFS709TP’s internal database, you will need to navigate to the
Configuration > Advanced > Security > Authentication Servers > Internal DB to add entries to
the database.
To configure an SSID in the WLAN Basic Configuration page, navigate to the Configuration >
Basic > WLAN page (Figure 5-1).
Note: The RADIUS server administrator must configure the server for
communication with the WFS709TP.
Figure 5-1