Filter
Top Products
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
14-4 Configuring WFS709TP for Voice
v1.0, June 2007
WPA Fast Handover
In 802.1x authentication, the WPA fast handover feature allows certain WPA clients to use a pre-
authorized Pairwise Master Key (PMK), significantly reducing handover interruption. Check with
the manufacturer of your handset to see if this feature is supported. This feature is disabled by
default.
To enable WPA fast handover:
1. Navigate to the Configuration > Advanced > Security > Authentication Methods > 802.1x
page.
2. Under Advanced Configuration, select Show.
3. Select WPA FastHandover.
4. Click Apply.
Note: This feature supports WPA clients, while opportunistic key caching (also
configured in 802.1x authentication) supports WPA2 clients.