Filter
Top Products
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
10-4 Adding Local WFS709TPs
v1.0, June 2007
3. Apply the configuration on the master.
Rebooting APs
The configuration changes take effect only after rebooting the affected APs; this allows them to
reassociate with the local WFS709TP. In the example shown in Figure 10-3, AP 1.1.20 will be
rebooted. After rebooting, these APs appear to the new local WFS709TP as local APs
(Figure 10-4).
Figure 10-3
Note: To verify that the local WFS709TP has obtained a copy of the global settings,
check the local WFS709TP for the global configuration changes made on the
master, such as authentication changes and WMS settings.
Figure 10-4