Filter
Top Products
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
13-8 Configuring Management Utilities
v1.0, June 2007
3. Navigate to Configuration > Advanced > WLAN > Network > SSID to configure the SSID for
the added APs (Figure 13-4).
4. Click the General tab to configure the SNMP parameters for the set of APs (Figure 13-5).
5. Refer to Table 13-3 and Table 13-4 for the fields to be configured for the set of APs.
6. Click Apply to apply the configuration.
Figure 13-4
Figure 13-5