Filter
Top Products
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Configuring WLANS 5-21
v1.0, June 2007
2. Set IRM Assignment to Single Band from the pull-down menu.
3. Select IRM Scanning to enable scanning on the AP.
4. (Optional) Set the IRM Scan Interval and IRM Scan Time on a per-AP basis
These values can be left to the default setting unless they need to be modified for a specific
environment.
5. The AP scans the network and hops to the best available channel based on the IRM algorithm.
Sometimes clients may not be able to adapt to this kind of dynamic AP channel change. To
disable an AP from changing channels when an active client is connected to it, select IRM
Client Aware.
6. Click Apply to apply the configurations.
Note: The Multi Band option is currently unavailable. Selecting Multi Band
automatically sets the selection to Single Band