Filter
Top Products
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Configuring Management Utilities 13-11
v1.0, June 2007
OUI misconfiguration This trap indicates an error in the Organizationally Unique
Identifier (OUI) configuration of an AP. The AP generates the
trap and includes its BSSID, the configured SSID, and the
location of the AP in the trap.
High
SSID misconfiguration This trap indicates an error in the SSID configuration of an AP.
The AP generates the trap and includes its BSSID, the
configured SSID, and the location of the AP in the trap.
High
Short Preamble
misconfiguration
This trap indicates an error in the Short Preamble
configuration of an AP. The AP generates the trap and
includes its BSSID, the configured SSID, and the location of
the AP in the trap. This check will be done only if the short-
preamble option is selected for the AP from the browser
interface.
High
AM misconfiguration This trap indicates an error in the Short Preamble
configuration of an AP. The AP generates the trap and
includes its BSSID, the configured SSID, and the location of
the AP in the trap.
High
Repeat WEP-IV violation The AM has detected a valid station or a valid AP sending
consecutive frames that have the same initialization vector
(IV). This usually means that entity has a “flawed” WEP
implementation and is therefore a potential security risk.
High
Weak WEP-IV violation The AM has detected a valid station or a valid AP sending
frames with an IV that is in the range of IVs that are known to
be cryptographically weak and therefore are a potential
security risk.
High.
Adhoc networks detected The AM has detected Adhoc networks. High
Valid station policy
violation
A valid Station policy is being violated. High
AP interference. The indicated AM (identified by the BSSID/ SSID) is detecting
AP interference on the indicated channel.
Medium
Frame Retry rate
exceeded
The percentage of received and transmitted frames with the
retry bit has crossed the High watermark. This event can be
triggered for an AP, a station, or a channel. The two values
that should be configured related to this event are Frame
Retry Rate – High Watermark and Frame Retry Rate –Low
Watermark. *
Medium
Table 13-6. Access Point SNMP Traps (continued)
Trap Description Priority Level