Filter
Top Products
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Configuring WLANS 5-17
v1.0, June 2007
The radio configuration in the Advanced WLAN pages also allow you to configure IntelliFi RF
Management (IRM) parameters, which are described in “IntelliFi RF Management” on page 5-19
and voice parameters, which are described in Chapter 14, “Configuring WFS709TP for Voice”.
Example Configuration
The following example includes:
• An 802.11 a/b/g SSID called Corpnet with dynamic WEP.
• An 802.11 b/g SSID called Voice with static WEP.
• The AP in location 4.2.6 is set to have a guest SSID in addition to the other two SSIDs. The
guest SSID is open.
To configure this system:
1. Configure the 802.11 a/b/g SSID Corpnet in the global location 0.0.0 with dynamic WEP
(Figure 5-6).
2. Configure the 802.11 b/g Voice SSID in the global location 0.0.0 with static WEP (Figure 5-7).
Figure 5-6