Filter
Top Products
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
6-2 Configuring AAA Servers
v1.0, June 2007
2. Navigate to the Configuration > Advanced > Security > AAA Servers > RADIUS Servers
page.
3. Click Add to add a new RADIUS server entry. Enter the values you gathered into the fields
shown in Figure 6-1.
Num Retries Maximum number of retries sent to the server by the WFS709TP
before the server is marked as down (default is 3)
Timeout Maximum time, in seconds, that the WFS709TP waits before timing out
the request and resending it (default is 5 seconds
NAS Source IP Address Network Access Server (NAS) IP address to send in RADIUS packets.
NAS Identifier NAS identifier to use in RADIUS packets.
Match ESSID Match the ESSID for the user name
Match FQDN Match the fully qualified domain name (FQDN) in the user name
Trim FQDN Trim the FQDN from the user name before sending to the RADIUS
server
Mode Enables or disables the server
Figure 6-1
Table 6-1. RADIUS Server Configuration Information
Parameter Description