Filter
Top Products
Replacing Modules and Filler Panels
3-22 296-1011-202 Rel. 5.0, Doc. Rev. 02.01
CVX 600 Hardware Installation Guide
Removing a Service Module
To remove a MAC or DAC-SM, follow these steps:
Step Action
1 Using a 1/4-inch flat-tip screwdriver, turn the locking screw in the upper left
corner of the filler panel 1/4 turn counterclockwise.
2 Grasp the left and right ejector levers and push them outward to eject the
service module. You will feel the module disconnect from the chassis
mid-plane.
CVX-0145A
Unlocked position
CVX-0158C
Open ejectors
Pwr
Good
Fail
Redun