Filter
Top Products
Cable Specifications
296-1011-202 Rel. 5.0, Doc. Rev. 02.01 A-7
Technical Specifications
Management Console Cable Specifications
The SCC-RLTM has a single console interface. The interface uses a DB-9 plug
connector that provides an RS-232 serial connection. The CVX 600 console port
allows you to connect to any VT100-compatible console device for direct console
access, or to any modem (AT or Hayes compatible) for remote dial-up access.
The following figure shows the DB-9 console interface connector:
DB-9 Pin and Signal Assignments
The following table lists the pin and signal assignments for the DB-9 console
interface connector:
Pin Signal To Signal
1 DCD (data carrier detect) DCD
2 TXD (transmit data) RXD
3 RXD (receive data) TXD
4 DSR (data set ready) DTR
5 GND (signal ground) GND
6 DTR (data terminal ready) DSR
7 CTS (clear to send) RTS
8 RTS (request to send) CTS
9 Not used Not used
Console
CVX-0175B
Pin 9
Pin 1