Nortel Networks CVX 600 Switch User Manual


 
Replacing Modules and Filler Panels
3-26 296-1011-202 Rel. 5.0, Doc. Rev. 02.01
CVX 600 Hardware Installation Guide
Replacing the DAC-LTM/-RLTM
If you need to replace an LTM or RLTM, note the configuration of installed
network cabling before you disconnect any cables. You will need to reinstall this
cabling on the replacement LTM.
References
For more information on removing the service module, see Replacing the
SCC-SM on page 3-11 or Replacing Other Service Modules on page 3-21.
Caution: Before removing the LTM or RLTM, you must first remove the
front-installed service module.