Connecting Power to the Chassis
296-1011-202 Rel. 5.0, Doc. Rev. 02.01 2-21
Chassis Connections
Connecting to a Customer-Supplied DC Power Source
The customer-supplied DC power source is only for the DC chassis option.
Prerequisites
Before connecting the CVX 600 to a DC power source, see “DC Power Supply
Warnings” on page vii.
Caution: Ensure that the wire gauge you use is adequate for the distance
between the CVX 600 and the DC power source. Before connecting
power cables to the CVX 600, use a volt/ohm meter to ensure that the
power cables are not live.