Filter
Top Products
Connecting Equipment to the Console Port
296-1011-202 Rel. 5.0, Doc. Rev. 02.01 2-33
Chassis Connections
Connecting a Terminal
To connect a terminal to the CVX 1800 using the DB-9 to DB-9 cable, follow
these steps:
Step Action
1 Turn on the terminal, then configure it using the parameters listed
below.
Reference: For instructions, see the documentation for the terminal or
the terminal emulation program.
Parameter Value
Terminal type VT-100
Baud rate 19200
Connect using Direct to COM 1
Flow control None
Data bits 8
Stop bits 1
Parity None
2 Turn off the terminal.
(continued)