Filter
Top Products
Installing and Removing the Flash Memory Cards
296-1011-202 Rel. 5.0, Doc. Rev. 02.01 2-29
Chassis Connections
Installing and Removing the Flash Memory Cards
Description
The SCC-SM contains dual PCMCIA slots for the flash memory card. The flash
memory card provides storage for the CVX 600 nonvolatile file system (NVFS),
operating system software, and configuration files. When you insert the flash
memory card, the NVFS automatically provides access to the flash memory card.
The dual PCMCIA slots are labeled 1 and 2. Slot 1 is the C: drive and slot 2 is the
D: drive. Always use slot 1 for the flash memory card. Use slot 2 if you need to
copy the flash memory card in slot 1 to a flash memory card in slot 2.
Reference
See the manual CVX Multi-Service Access Switch Configuration Guide for
information about copying a flash memory card.
Note: If the flash memory card is not already in the SCC, insert it into
slot 1.
Warning: You must use software Release 5.0 or later when using an
Optical SCC-II-SM. Use of older versions will corrupt the SCC-SM,
requiring the return of the module to Nortel for reprogramming. Do not
copy earlier versions of software to a flash memory card used in an
Optical SCC-II-SM.