Filter
Top Products
Cable Specifications
296-1011-202 Rel. 5.0, Doc. Rev. 02.01 A-9
Technical Specifications
HSSI Interface
The following figure shows the HSSI connector:
HSSI DTE to DCE Pin and Signal Assignments
The following table lists the pin and signal assignments for the HSSI DTE to DCE
interface cable:
Nortel Networks Termination Remote Termination
Pin Signal Pin Signal
1 Signal Ground 1 Signal Ground
26 Signal Ground 26 Signal Ground
2 Receive timing+ 2 Receive timing+
27 Receive timing- 27 Receive timing-
3 DCE Available+ 3 DCE Available+
28 DCE Available- 28 DCE Available-
4 Received Data+ 4 Received Data+
29 Received Data- 29 Received Data-
5 Line Loopback+ 5 Line Loopback+
30 Line Loopback- 30 Line Loopback-
6 Send Timing+ 6 Send Timing+
31 Send Timing- 31 Send Timing-
7 Signal Ground 7 Signal Ground
32 Signal Ground 32 Signal Ground
(continued)
Cable length: 50 ft maximum
Pin 1
Pin 50
Pin 25
Pin 26
50-pin high-density cable connector
CVX-0105B