Filter
Top Products
Configuration Worksheet for MCMP Mode (2 of 3)
Prt6 Options Value
Async→Sync Enab, Disab
Async Rate =Sync, 1800, 1200, 600, 300, 150
AsyncBit/Char 6, 7, 8, 9, 10
Stop Bits 1, 2
Overspeed 1.25, 2.5
RTS Cntrl FrcOn, DTE
TxCarrSel Const, Cntrl
RxCarrSel Const, Cntrl, Mark
PCC Buffer Enab, Disab
Elast Stor Enab, Disab
RTS/CTS Del
(Chang
)
0–1040 ms (8 ms increments)
DTR Alarm Enab, Disab
Antistream
(Chang
)
Disab, 1–100 sec (async terminal = 0–100)
DSR FrcOn Enab, Disab
DSR on Tst Enab, Disab
Extend Chan Yes, No
Upstrm Port Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
DTE Port** EIA232, V.35
PrtSP (Chanl) Value
AssgmntPrt1 A, B, C, D, E, F, G, H, None
AssgmntPrt2 A, B, C, D, E, F, G, H, None
AssgmntPrt3 A, B, C, D, E, F, G, H, None
AssgmntPrt4 A, B, C, D, E, F, G, H, None
AssgmntPrt5 A, B, C, D, E, F, G, H, None
AssgmntPrt6 A, B, C, D, E, F, G, H, None
DSU Options Value
Rate (Kpbs) 56
TxClkSource Int, RXC, DDS
Msg Clamp Enab, Disab
TxElasStor Enab, Disab
RxElastStor Enab, Disab
19.2 PowrLvl +6, 0, –10
64KScrambling On, Off
64KLatchLpbk On, Off
AggrSwitch Enab, Disab
AgSw Timing Int, Aggr
V.54 Lpbk Enab, Disab
PrtSp Options (DSU) Value
Prt1 ( ) 48, 38.4, 19.2, 18.0, 16.8, 14.4, 12.0, 9.6, 7.2,
4.8, 2.4, 1.2, Disab
Prt2 ( ) 48, 38.4, 19.2, 18.0, 16.8, 14.4, 12.0, 9.6, 7.2,
4.8, 2.4, 1.2, Disab
Prt3 ( ) 48, 38.4, 19.2, 18.0, 16.8, 14.4, 12.0, 9.6, 7.2,
4.8, 2.4, 1.2, Disab
Prt4 ( ) 48, 38.4, 19.2, 18.0, 16.8, 14.4, 12.0, 9.6, 7.2,
4.8, 2.4, 1.2, Disab
Prt5 ( ) 48, 38.4, 19.2, 18.0, 16.8, 14.4, 12.0, 9.6, 7.2,
4.8, 2.4, 1.2, Disab
Prt6 ( ) 48, 38.4, 19.2, 18.0, 16.8, 14.4, 12.0, 9.6, 7.2,
4.8, 2.4, 1.2, Disab
Underspeed: Disab, Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
PrtSp Optons (DBM)*** Value
Prt1 ( ) 56*, 48*, 38.4*, 32*, 28.8*, 19.2*, 18.0*, 16.8*,
14.4, 12.0, 9.6, 8.4
,
7.2, 4.8, 4.0, 2.4, 2.0, 1.2,
Disab
Prt2 ( ) 56*, 48*, 38.4*, 32*, 28.8*, 19.2*, 18.0*, 16.8*,
14.4, 12.0, 9.6, 8.4
,
7.2, 4.8, 4.0, 2.4, 2.0, 1.2,
Disab
Prt3 ( ) 56*, 48*, 38.4*, 32*, 28.8*, 19.2*, 18.0*, 16.8*,
14.4, 12.0, 9.6, 8.4
,
7.2, 4.8, 4.0, 2.4, 2.0, 1.2,
Disab
Prt4 ( ) 56*, 48*, 38.4*, 32*, 28.8*, 19.2*, 18.0*, 16.8*,
14.4, 12.0, 9.6, 8.4
,
7.2, 4.8, 4.0, 2.4, 2.0, 1.2,
Disab
Prt5 ( ) 56*, 48*, 38.4*, 32*, 28.8*, 19.2*, 18.0*, 16.8*,
14.4, 12.0, 9.6, 8.4
,
7.2, 4.8, 4.0, 2.4, 2.0, 1.2,
Disab
Prt6 ( ) 56*, 48*, 38.4*, 32*, 28.8*, 19.2*, 18.0*, 16.8*,
14.4, 12.0, 9.6, 8.4
,
7.2, 4.8, 4.0, 2.4, 2.0, 1.2,
Disab
Underspeed: Disab, Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
Diagnostic DSU
Options
Value
Diag Type NonD, Disr, Mixed, None
2nd Ch(bps) 100, 400, 800, 1200, 1600
Disr Type 2500, 2500, 3600s, 3600e, Br56
*Switched 56 DBM only
** Available for MCMP/Flex with DSU firmware version 6.3
x
or greater
*** TDM Backup only
****2-wire Switched 56 DBM only
{Not available if a Switched 56 DBM
{{Not available if a Primary Core is No
Diagnostic DBM
Options
Value
Diag Type NonD, Disr, Mixed, None
2nd Ch(bps) 100, 400, 800, 1200, 1600
RemoteDiag V.54, Enhan, 2500
Diagnostic General
Options
Value
Position Cntrl, Trib
LinkConfig Pt-Pt, M-Pt
Resp Period 1, 2, 10
Trib TimOut
(Chang)
sec to min
Diag Conn CC, DC
Link Delay 0s, 1s, 2s, 5s, 10s, 20s, 50s
Network Delay 0s, 1s, 2s, 5s, 10s, 20s, 50s
Packet Delay 0s, 1
s,
2s, 5s
Fast Sel Enab, Disab
DBM Options Value
Rate(Kbps){ 14.4, 12.0, 9.6, 4.8, 2.4
TxClkSource{ Int, RXC, DSU
CarrLossDisc{ Yes, No
Auto Retrain{ Yes, No
Single Rate{ Yes, No
AutoAnswer Enab, Disab
TxElasStor Enab, Disab
RxElasStor Enab, Disab
Call Setup None, Pswrd, Cllbk, Alarm
RxPwd
(Chang)
TxPwd
(Chang)
V.13 Signl Enab, Disab
Dial Test Enab, Disab
Primary Core Yes, No
DtrCallCon Orig{{, Ansr, Disab
EchoCancel* Enab, Disab
Remote DBM*** 2-wire, 4-wire