Filter
Top Products
Network setup_ 39
INSTALLING NETWORK CONNECTED
MACHINE’S DRIVER
Selecting Custom installation allows you to choose programs to
install.
Windows
You can set up the machine driver, follow the steps below.
This is recommended for most users. All components necessary for
machine operations will be installed.
1. Ma
ke sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set. For details
about connecting to the network, see the supplied machine’s Quick
Install Guide.
2. Insert the supplied software CD into your CD-ROM drive.
• The software CD should automatically run and an installation window
appear.
• If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing “X” with the letter which represents
your drive. Click OK.
• If you use Wi
ndows Vista, click Start > All programs > Accessories
> Run.
Type X:\Setup.exe replacing “X” with the letter which represents
your drive and click OK.
• If
the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
3. Click Next.
If necessary, select a language from the drop-down list.
4. Select Typical installation for a network printer and then click Next.
5. The list of machines available on the network appears. Select the
machine you want to install from the list and then click Next.
• If you do not see your machine on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your machine
to the network. To add the machine to the network, enter the
port name and the IP address for the machine. To verify your
machine’s IP address or the MAC address, print a Network
Configuration page.
• To find a shared machine (UNC Path)
, select Shared Printer
[UNC] and enter the shared name manually or find a shared
printer by clicking the Browse button.
• If you cannot find your machine in network,turn off the firewall
and click Update. For Wind
ows operating system, click Start >
Control Panel > Windows Firewall, and inactivate this option.
For other operating system, refer to its on-line guide.
6. After the
installation is finished, a window asking you to print a test page
appears. If you choose to print a test page, select the checkbox and click
Next. Otherwise, just click Next and skip.
7. If the test page prints out correctly, click Yes.
If not, click No to reprint it.
8. T
o register as a user of the machine in order to receive information from
Samsung, select the checkbox and click Finish. You are now registered
to the Samsung web site.