Filter
Top Products
Scanning_ 79
Scanning with network
1. Make sure that the machine is connected to your computer and powered
on.
2. Loa
d originals face up into the document feeder , or place a single
original face down on the scanner glass.
(See "Loading originals" on page 44.)
3. Star
t Applications and click Image Capture.
4. Click Devices and click Browse Devices.
5. For Mac OS X 10.4:
Select your machine in Twain devices option. Make sure that Use
TWAIN software checkbox is checked, and click Connect.
• If a warni
ng message appears, click Change Port.. to select port.
• If TW
AIN UI appears, from the Preference tab, click Change Port..
to select port.
Refer to Scan Manager for Change port.. use. (See "Setting
scan information in Scan Manager" on page 79.)
For Mac OS X 10.5:
Make sure that Con
nected checkbox is checked beside your machine in
Bonjour Devices.
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
above.
6. Set the scan options on this program.
7. Scan and save your scanned image.
• For more information about using Image Capture,refer to the
Image Capture’s help.
• Use TWAIN-compliant softwares to ap
ply more scan options.
• You can also scan using TWAIN-compliant softwares, such as
Adobe
Photoshop.
• If scanning does not operate in Imag
e Capture, update Mac OS to
the latest version. Image Capture operates properly in Mac OS X
10.3.9 or higher and Mac OS X 10.4.7 or higher.
Setting scan information in Scan Manager
To find out about Scan Manager program information, to check the
installed scan driver's condition, to change scan settings. and to add or
delete the folders where scanned documents to computer are saved in
Scan Manager program, follow these instructions:
1. Fro
m the Smart Panel menu on Status bar, click Scan Manager.
2. Select the appropriate machine from the Scan Manager .
3. Press Properties.
4. Use Set Scan Button to change the file destination or scan settings,
to add or delete application programs, and to format files. You can
change the scanning machine by using Change port. (Local or
Network)
5. When done, press OK.
LINUX SCANNING
You can scan a document using the Unified Driver Configurator window.
Scanning
1. Double-click the Unified Driver Configurator on your desktop.
2. Click the button to switch to Scanners Configuration.
3. Select the scanner on the list.
If you use only one machine device and it is connected to the computer
and turned on, your scanner appears on the list and is automatically
selected.
If you have two or more scanners connected to your computer, you can
se
lect any scanner to work at any time. For example, while acquisition is
in progress on the first scanner, you may select the second scanner, set
the device options and start the image acquisition simultaneously.
4. Click Pr
operties.
5. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
(See "Loading originals" on page 44.)
6. Fro
m the Scanner Properties window, click Preview.
The document is scanned and the image preview appears in the
Pr
eview Pane.
7. Drag the pointer to set the image area to be scanned in the Preview
Pane.
8. Change the scan options in the Image Quality and Scan Area sections.
• I
mage Quality : This option allows you to select the color
composition and the scan resolution for the image.
• Scan
Area : This option allows you to select the page size. The
Advanced button enables you to set the page size manually.
If you want to use one of the preset scan option settings, select the
option from the Job Type drop-down list. (See "Adding Job Type
Settings" on page 80.)