Filter
Top Products
Printing_ 53
Us Folio, or Oficio sized print media.
8
9
1. To change the print settings from your software application, access the
Printing Preferences. (See "Opening Printing Preferences" on
page 55.)
2. Click the Basic tab, select Booklet Printing from the Type drop-down
list.
3. Click the Paper tab, select the Size, Source, and Type.
The Booklet Printing option is not available for all paper sizes. In
order to find out the available paper size for this feature, select the
available paper size in the Size option on the Paper tab.
If you select an unavailable paper size, this option can be
automatical
ly canceled. Select only available paper. (paper without
or mark).
4. Click OK or Print
until you exit the Print window.
5. After printing, fold and staple the pages.
Printing on both sides of paper
You can print on both sides of a paper; duplex. Before printing, decide how
you want your document oriented. You can only use this feature with Letter,
Legal, A4, US Folio, or Oficio sized paper.
Do not print on both sides of the special media, such as labels,
envelopes, or thick paper to print on both sides of paper. It may cause
a paper jam or damage the machine.
1. To cha
nge the print settings from your software application, access
Printing Preferences. (See "Opening Printing Preferences" on
page 55.)
2. Click th
e Basic tab.
3. From the Double-sided Printing section, select the binding option you
want.
• Printer Default : If you select this option, this feature is determine
d
by the setting you’ve made on the control panel of the machine.
• None
• Lo
ng Edge : This option is the conventional layout used in
bookbinding.
• Short Edge : This option is the conventional layout used in
calendars.
• Reverse Double-Sided Printing : Check this option to reverse the
print order when duplex printing.
4. Click the Paper tab, select the Size, Source, and Type.
5. Click OK or Print until you exit the Print window.
If your machine does not have a duplex unit, you should complete the
printing job manually. The machine prints every other page of the
document first. After that , a message appears on your computer.
Follow the on-screen instructions to complete the printing job.
Change percentage of your document
You can change the size of a document to appear larger or smaller on the
printed page by typing in a percentage you want.
1. To change the print settings from your software application, access
Printing Preferences. (See "Opening Printing Preferences" on
page 55.)
2. Click the Paper tab.
3. En
ter the scaling rate in the Percentage input box.
You can also click the up/down arrows to select the scaling
rate.
4. Select the Size, Source, a
nd Type in Paper Options.
5. Click OK or Print until you exit the Print window.
Fitting your document to a selected paper size
A
This printer feature allows you to scale your print job to any selected paper
size regardless of the document size. This can be useful when you want to
check fine details on a small document.
1. To change the print settings from your software application, access
Printing Preferences. (See "Opening Printing Preferences" on
page 55.)
2. Click the Paper tab.
3. Se
lect the paper size you want from the Fit to page .
4. Select the Size, Source, and Type in Paper Options.
5. Click OK or Print until you exit the Print window.
Using watermarks
The watermark option allows you to print text over an existing document.
For example, you use it when you want to have large gray letters reading
“DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all
pages of a document.
There are several predefined watermarks that come with the machine. They
can be modified, or you can add new ones to the list.